Cleaning The Rear Paper Feed Path Using The Cleaning Sheet - Epson ET-7750 User Manual

Cleaning the Rear Paper Feed Path Using the Cleaning Sheet

If your paper does not feed correctly, clean the paper path inside the printer using the cleaning sheet that
came with your product. The cleaning sheet should only be used to clean the rear paper feed.
Caution: Do not use tissues to clean inside the product; lint from tissues may clog the print head
nozzles.
1. Make sure there is no paper in the rear paper feed slot and the output tray is extended.
2. Press the
3. Press the arrow buttons to select Maintenance and press the OK button.
4. Press the down arrow button to select Paper Guide Cleaning (Rear) and press the OK button.
5. Follow the on-screen instructions to clean the paper path.
6. Remove the protective sheet from the cleaning sheet.
7. Load the cleaning sheet into the rear paper feed slot and slide the edge guides against the sheet.
Make sure you insert the cleaning sheet with the cut corner at the lower right as shown.
8. Press the
9. Check the cleaning sheet when it comes out of the product. You can repeat the previous steps up to
three times as necessary (the cleaning sheet loses its effectiveness when used three times or more).
Parent topic:
home button, if necessary.
start button to feed the cleaning sheet through the product.
Adjusting Print Quality
219