Fig. 24 Select "Cleaning Mode; Fig. 25 Configuration "Cleaning Mode - Beckhoff CP22 Series Manual

The Beckhoff Control Tool does not start automatically when the device starts up. Proceed as follows to
activate the "Cleaning Mode" of the Beckhoff Control Tool:
1. Go to the Beckhoff Control Tool to start it.
ð When the tool is started, a small sun symbol appears in the taskbar.
2. Right-click the sun symbol.
3. Select the "Cleaning Mode" (see Fig.).
ð "Cleaning Mode" is activated. You can now clean the front panel.
Fig. 24: Select "Cleaning Mode"
You can set the duration for which the panel PC should remain in "Cleaning Mode". The period can be set
between 5 and 120 seconds. Right-click the sun symbol again and click "Options". Now select the
appropriate duration (see Fig.).
Fig. 25: Configuration "Cleaning Mode"
7.2 Maintenance
Use of incorrect spare parts
The use of spare parts not ordered from Beckhoff Service can lead to unsafe and faulty operation.
• Only use spare parts that you have ordered from Beckhoff Service.
Beckhoff devices are manufactured from components of the highest quality and robustness. They are
selected and tested for best interoperability, long-term availability and reliable function under the specified
environmental conditions.
CP22xx
NOTICE
Version: 2.9
Maintenance
39