Optional Interfaces; Table 8 Cp22Xx Interface Options; Table 9 Cp22Xx Pcie Module Slots - Beckhoff CP22 Series Manual

Product overview
3.3

Optional interfaces

Various interface options are available to expand your panel PC with additional interfaces beyond the basic
configuration. The following table provides information about the available interfaces depending on the
device generation:
Table 8: CP22xx interface options
Ordering option Description
1)
C9900-E268 1-port USB interface in the front of a CP2xxx
without push button extension, USB-A socket IP 65
FC9071-0000 Gigabit-Ethernet PC network card 10/100/1000
Mbit/s, 1-channel, PCIe interface, covers the
fieldbus connection section
C9900-E308 Serial interface, RS232, electrical isolation, D-sub,
9-pin, PCIe interface covers the fieldbus connection
section
C9900-E233 1 RS232 serial interface led out in the connection
section of the CP2xxx
C9900-E240 Serial interface COM2, RS232, electrical isolation,
overvoltage protection, D-sub, 9-pin
C9900-E241 Serial interface COM2 RS485, electrical isolation,
overvoltage protection, D-sub, 9-pin. Configuration
as endpoint without echo: Echo off, Auto send on,
Always send off, Auto receive on, Always receive
off, Termination on.
C9900-E242 Serial interface COM2 RS485, electrical isolation,
overvoltage protection, D-sub, 9-pin. Configuration
as full duplex endpoint: Echo on, Auto send off,
Always send on, Auto receive off, Always receive
on, Termination on
1)
This option is not available in combination with stainless steel front.
PCIe modules
In addition, you can expand the panel PC with PCIe modules by ordering the device with PCIe module slots:
Table 9: CP22xx PCIe module slots
Ordering option Description
C9900-B517 2 PCIe module slots, integrated in the CP22xx, for
inserting Beckhoff PCIe modules, instead of 2
connector brackets for leading out interfaces
The PCIe module is the Beckhoff definition of a small plug-in card format with a PCIe-x1 bus interface. For
ordering options, please contact your Beckhoff Sales department. If you have ordered your device without
PCIe module slots and subsequently want to install PCIe modules, you must first send your device to
Beckhoff Service for the conversion (see chapter 10.1 Service and Support).
Depending on the selected display size of your device, the PCIe module slots are located at different places
in the connection section (see Fig. 10).
18 Version: 2.9
Device generation
CP22xx-0020
CP22xx-0030
CP22xx-0040
CP22xx-0020
CP22xx-0030
CP22xx-0040
CP22xx-0020
CP22xx-0030
CP22xx-0040
CP22xx-0030
CP22xx-0040
CP22xx-0030
CP22xx-0040
CP22xx-0030
CP22xx-0040
Device generation
CP22xx-0020
CP22xx-0030
CP22xx-0040
CP22xx