Fig. 13: Delivery state clamping lever
To install and secure the panel PC in the control cabinet, follow the steps shown in Fig. 14 and 15:
1. Insert the panel PC at the intended position in the wall of the control cabinet. Make sure that the device is
secured against falling out until it is fastened properly.
Fig. 14: Wall positioning
2. Turn the clamping levers 90° outwards (sections A and B).
3. Tighten the clamping levers with the Allen key 3.0 mm (section C).
CP22xx
Version: 2.9
Commissioning
25