Fig. 39 Select "Cleaning Mode; Fig. 40 Configuration "Cleaning Mode - Beckhoff CP37 1600 Series Manual

The Beckhoff Control Tool does not start automatically when the panel PC starts up. Proceed as follows to
activate the "Cleaning Mode" of the Beckhoff Control Tool:
1. Go to the Beckhoff Control Tool to start it.
ð When the tool is started, a small sun symbol appears in the taskbar.
2. Right-click the sun symbol.
3. Select the "Cleaning Mode" (see Fig. 39).
ð "Cleaning Mode" is activated. You can now clean the front panel.
Fig. 39: Select "Cleaning Mode"
You can set the duration for which the panel PC should remain in "Cleaning Mode". The period can be set
between 5 and 120 seconds. Right-click the sun symbol again and click "Options". Now select the
appropriate period (see fig. 40).
Fig. 40: Configuration "Cleaning Mode"
CP37xx-1600 Version: 1.9
Maintenance
47