Fig. 28 Exchange Hard Disk - Beckhoff CP22 Series Manual

2. Turn the cover to the left side (section B).
3. Remove the hard disk or SSD from the panel PC by pulling on the protruding Beckhoff sticker (section
C).
A
C
BECKHOFF
Fig. 28: Exchange hard disk
4. Insert the new hard disk or SSD into the PC in the same orientation up to the stop.
ð You have replaced the hard disk or SSD.
Replacing the CFast
To replace the CFast, follow the steps shown below in Fig. 29:
1. Loosen and remove the M4 screw (section A).
2. Turn the cover to the left side (section B).
3. Press lightly on the CFast from above, like on a button (section C).
ð When you release the CFast, the push-pull mechanism guides the CFast out of the slot far enough
for you to grab it.
4. Pull the CFast out of the PC (section D).
5. Insert the new CFast into the PC in the same orientation until it protrudes just a bit from the PC.
6. Press the CFast into the PC.
ð You have replaced the CFast.
CP22xx
B
Version: 2.9
Maintenance
43