Beckhoff CP27 Series Installation And Operating Instructions Manual
Fanless multi-touch built-in panel pc
Hide thumbs
Also See for CP27 Series:
- Manual (53 pages) ,
- Installation and operating instructions manual (30 pages)
Related Manuals for Beckhoff CP27 Series
Summary of Contents for Beckhoff CP27 Series
- Page 1 Installation and Operating instructions for CP27xx Fanless multi-touch built-in Panel PC Version: 1.1 Date: 2018-11-23...
-
Page 3: Table Of Contents
Table of contents Table of contents 1 Foreword Notes on the Documentation 1.1.1 Liability Conditions 1.1.2 Trademarks 1.1.3 Patent Pending 1.1.4 Copyright 1.1.5 State at Delivery 1.1.6 Delivery conditions Description of safety symbols Basic safety measures Operator’s obligation to exercise diligence 1.4.1 National regulations 1.4.2... - Page 4 5 UPS Software Components (optional) Installation on the PC Help files 6 Troubleshooting 7 Assembly dimensions 8 Technical Data 9 Appendix Beckhoff Support and Service 9.1.1 Beckhoff branches and partner companies 9.1.2 Beckhoff company headquarters Approvals for USA and Canada CP27xx...
- Page 5 Table of contents FCC Approvals for the United States of America FCC Approval for Canada CP27xx...
-
Page 6: Foreword
Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG. 1.1.6 Delivery conditions In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply. CP27xx... -
Page 7: Description Of Safety Symbols
Foreword 1.2 Description of safety symbols The following safety symbols are used in this operating manual. They are intended to alert the reader to the associated safety instructions. Acute risk of injury! If you do not adhere the safety advise adjoining this symbol, there is immediate danger to life and health of individuals! DANGER Risk of injury! -
Page 8: Basic Safety Measures
Foreword 1.3 Basic safety measures Before the Panel PC is switched off, software that is running must be properly closed. Otherwise it is possible that data on the storage medium is lost. Please read the section Switching the Panel PC on and off. -
Page 9: Operator's Obligation To Exercise Diligence
• the operation manual is in good condition and complete, and always available for reference at the location of the product. Do not open the housing of the Panel PC! For technical support contact Beckhoff Service. Note 1.4.1 National regulations Depending on the type of machine and plant in which the Panel PC is used, national regulations governing the controllers of such machines will apply, and must be observed by the operator. -
Page 10: Product Description
It is designed for installation in the front of a control cabinet. The CP27xx combine reliable Beckhoff Control Panel design with state-of-the-art Industrial PC technology. The right display size is available for every application. With their highly integrated 3½-inch motherboards, the CP27xx built-in Industrial PCs represent a high-performance... -
Page 11: Appropriate Use
Product Description 2.2 Appropriate Use The multi-touch built-in Panel PC CP27xx is designed for industrial application in machine and plant engineering. A multi-touch display is accommodated in an aluminium housing. The Panel PC is installed in the front of control cabinets. Risk of explosion! The Panel PC must not be used where there is a risk of explosion. -
Page 12: Interfaces
Product Description 2.4 Interfaces X103 X104-X107 X108 X109 X110 Ground DVI-I out LAN1 LAN2 Power 2.4.1 DVI-I out (Digital Visual Interface) (X103) The DVI connection (X103) is used for transferring the video signal. DVI-I standard is supported. 2.4.2 USB output (X104 - X107) The four USB interfaces (X104 - X107, connector type A) are used for connecting peripheral devices with USB connection. -
Page 13: Access To The Battery And The Cfast Card Slots
Option Extension C9900-B518 PCIe module slot, integrated in the CP27xx for plugging-in Beckhoff-PCIe modules 2.6.1 Access to the module slot The PCIe module slot is located behind the cover plate next to the interfaces of the Panel PC. cover plate (1) mounting screws (2) For mounting of a plug-in card first unloose the screws (2). -
Page 14: Installation
4. Please keep the associated paperwork. It contains important information for handling the unit. 5. Check the contents for visible shipping damage. If you notice any shipping damage or inconsistencies between the contents and your order, you should notify Beckhoff Service. CP27xx... -
Page 15: Installation In The Control Cabinet
Installation 3.2 Installation in the control cabinet The Panel PC CP27xx is designed for mounting in control cabinets in machine and plant engineering applications. The ambient conditions specified for operation must be observed (see chapter Technical Data). 3.2.1 Preparation of the control cabinet The control cabinet wall must be prepared with the required mounting opening according to the Panel PC’s dimensions (see chapter Assembly... -
Page 16: Mounting Of The Panel Pc
Installation 3.2.3 Mounting of the Panel PC The Panel PC is installed in the cabinet wall with clamping levers. For the cutout dimension of the Panel PC see chapter Technical Data, the wall thickness is between 1 mm and 5 mm. 1. -
Page 17: Power Supply Of The Industrial Pc
(UPS) using the battery pack Note C9900-U330. Danger of Explosion! Danger of Explosion if using other battery packs! WARNING 3.3.1 Beckhoff power supply technology Example: Schematic diagram of power supply unit wirings CP27xx... -
Page 18: Pin Assignment Of The Connector
The new Beckhoff power supply technology approach addresses this problem and now offers the user the option of switching the PC off without the need for using the battery, thereby reducing the load on the battery. -
Page 19: Fitting The Power Supply Cable
Installation 3.4 Fitting the power supply cable Fit the cables for the power supply of the Industrial PC, the connection of the battery pack as well as the connection of the power-switch in accordance with the wiring diagram, using the included material for assembling the connectors: Material for assembling the connectors Plug connector 8-pole, Strain relief housing with lacing cord... -
Page 20: Connecting Power Supply
Installation 3.5 Connecting Power Supply The external wiring consists of the connection of the power supply, the battery pack (optional) and the connection of customized components for shutting down the PC. 3.5.1 Cable Cross Sections For the connection of the power supply, wiring with a cable-cross-section of 1.5 mm must be used. -
Page 21: Ups Output
Installation 3.5.5 UPS output In order to maintain a screen display for the PC in the event of a power failure, the power supply unit is equipped with a UPS output for connecting a Control Panel. The maximum load for the output is 1.4 A. 3.5.6 UPS output function •... -
Page 22: Connecting The Panel Pc
Installation 3.6 Connecting the Panel PC The mains plug must be disconnected Please read the documentation for the external devices prior to connecting them! Attention During thunderstorms, plug connector must neither be inserted nor removed! When disconnecting a plug connector, always handle it at the plug. Do not pull the cable! 3.6.1 Connecting cables The connections are located at the bottom of the Panel PC and are documented in the chapter Interfaces. -
Page 23: Operating Instructions
Operating Instructions 4 Operating Instructions 4.1 Switching the Panel PC on and off 4.1.1 Switching on The Panel PC does not have its own mains power switch. As soon as the power supply is switched on the Panel PC is activated. 4.1.2 Shutting down and switching off Control software such as is typically used on Industrial PCs permits various users to be given different rights. -
Page 24: Servicing And Maintenance
Operating Instructions 4.3 Servicing and maintenance 4.3.1 Cleaning Disconnect power supply Switch off the device and all connected devices, and disconnect the device from the power supply. DANGER The device can be cleaned with a soft, damp cleaning cloth. Do not use any aggressive cleaning materials, thinners, scouring material or hard objects that could cause scratches. -
Page 25: Ups Software Components (Optional)
Industrial PC. On delivery of the Beckhoff Industrial PC with operating system the software is already installed. Should the software not be installed on your PC, the drivers can be installed from the driver CD provided. -
Page 26: Troubleshooting
No power supply to the Panel PC Check power supply cable Cable not connected Correctly connect cable Call Beckhoff Service Panel PC boots, software starts, but Cause of the fault is either in the Call the manufacturer of the control does not operate correctly... -
Page 27: Assembly Dimensions
7 Assembly dimensions For the assembly dimensions of the Panels PC please visit our homepage. Here you will find the actual drawings using the link: http://www.beckhoff.de/german/download/technical_drawings.htm Notice mounting orientation The assembly of the unit must take place with the orientation diagrammed here. -
Page 28: Technical Data
Technical Data 8 Technical Data Risk of explosion! Do not use the Panel PC in areas of explosive hazard! Danger Pixel errors Pixel errors in the TFT display are production-caused and represent no complaint- reason! Note Anomalies of the Touchscreen Anomalies of the touchscreen sensor are production-caused and represent no complaint-reason! Note... -
Page 29: Appendix
Please contact your Beckhoff branch office or partner company for local support and service on Beckhoff products! The contact addresses for your country can be found in the list of Beckhoff branches and partner companies: www.beckhoff.com. You will also find further documentation for Beckhoff components there. -
Page 30: Approvals For Usa And Canada
Appendix 9.2 Approvals for USA and Canada 9.3 FCC Approvals for the United States of America FCC: Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.