Fig. 19 Select "Cleaning Mode; Fig. 20 Configuration "Cleaning Mode - Beckhoff CP6706-0001 Manual

Maintenance
3. Select the "Cleaning Mode" (see Fig.).
ð "Cleaning Mode" is activated. You can now clean the front panel.
Fig. 19: Select "Cleaning Mode"
You can set the duration for which the panel PC should remain in "Cleaning Mode". The period can be set
between 5 and 120 seconds. Right-click the sun symbol again and click "Options". Now select the
appropriate duration (see Fig.).
Fig. 20: Configuration "Cleaning Mode"
7.2 Maintenance
Use of incorrect spare parts
The use of spare parts not ordered from Beckhoff Service can lead to unsafe and faulty operation.
• Only use spare parts that you have ordered from Beckhoff Service.
Beckhoff devices are manufactured from components of the highest quality and robustness. They are
selected and tested for best interoperability, long-term availability and reliable function under the specified
environmental conditions.
Nevertheless, some components of the devices may be subject to a limited service life if they are operated
under certain conditions, such as at increased ambient temperatures during operation or during storage or
during long periods of storage out of operation.
Beckhoff therefore recommends replacing some of the components of the devices after the time after which
predictions of the remaining service life of such components can no longer be reliably calculated.
These are the following components:
• Battery
32
NOTICE
Version: 2.0 CP6706-0001