Interface Description; Fig. 2 Position Interfaces; Fig. 3 Opening The Front Flap - Beckhoff C5240 Manual

3.2

Interface description

In the basic configuration, the C5240 includes the following interfaces:
• Power supply (X101)
• PS/2 mouse and keyboard (X103, X104)
• USB (X108-X111, X212, X213)
• Ethernet RJ45 (X112, X113)
• DVI (X114, X115)
• RS232 (X116)
• DisplayPort (X117)
• Audio connections (X120-X122)
Most of the interfaces are located on the rear side of the industrial PC in the connection section (see Fig. 2,
section A). The two USB interfaces X212 and X213 are located in the front of the industrial PC behind the
front flap (section B).
A
Fig. 2: Position interfaces
To access the USB interfaces in the front, you first have to open the front flap. To do this, follow the steps
below as shown in Figure 3:
1. Unlock the front flap with the corresponding key (section A).
2. Turn the front flap down (section B).
ð You now have access to the USB interfaces.
A
Fig. 3: Opening the front flap
C5240
B
B
Version: 3.0
Product overview
11