Table of Contents
Advertisement
Figure 8-8 Removing the SD card cover
Checking the SD card data
The data is read out with a PC and an SD card reader. The PC requires a driver for the ext4 file
system.
Open and check the data using the Transparenz software. If you remove the SD card, the
charging station is not available until you insert the card again.
NOTE
SD card type
Only use an SD card that is approved by Siemens.
8.4
Software updates
Software updates
Siemens makes software updates available as part of ongoing feature enhancements and
improvements. Check the software version of your system (Page 68) regularly. Keep the
software version of your system up-to-date with software updates.
Update files and information on performing the update are available here
(https://support.industry.siemens.com/cs/de/en/view/109800774).
See also
Commissioning and parameter assignment (Page 50)
SICHARGE Operating instructions, ERK
Operating Instructions, 02/2023, A5E48571690-AE
Maintenance and service
8.4 Software updates
99
Advertisement
Table of Contents
