Table of Contents
Advertisement
9. Route the cable(s) through the sealing plate.
NOTE
Ethernet interface version
When using a prefabricated network cable, sealing is not guaranteed by the sealing plate.
Do not install the RJ45 plug on the network cable until step 9 has been completed.
You can find more information in section Optional equipment (Page 46).
10. Mount the sealing plate flush with the mounting plate.
Figure 4-4 Cable entry
SICHARGE Operating instructions, ERK
Operating Instructions, 02/2023, A5E48571690-AE
Assembly/installation
4.3 Assembly procedure
41
Advertisement
Table of Contents
