Siemens SICHARGE Operating Instructions Manual page 52

Connecting and commissioning
5.5 Commissioning and parameter assignment
Dashboard
The status of the connections is shown in tab "Dashboard".
Figure 5-4 Dashboard
Network/Interfaces
Set the network connection in the "Network/Interfaces" tab.
Set the check mark at "Use DHCP" to reach the charging station with a name. Remove the
check mark to enter the network settings.
When using the wireless connection, the check mark for DHCP is automatically set.
Remove the check mark to enter the network settings manually.
52
SICHARGE Operating instructions, ERK
Operating Instructions, 02/2023, A5E48571690-AE