Table of Contents
Advertisement
UPS2000-A-(6 kVA-10 kVA)
User Manual (App)
Optional
Model
Component
10 kVA
DGL-10/0.22
output
isolation
transformer
box
Ambient T/H
EN3MEIM03C101
sensor
SNMP card
EN83CTLA
Dry contact
EN83CTLC
card
2.6.2 Lead-Acid Battery Pack
A battery pack consists of 20 built-in 12 V, 7 Ah/9 Ah VRLA batteries connected in
series and is configured for the 6 kVA and 10 kVA UPSs. A maximum of four
battery packs can be connected in parallel.
Issue 02 (2024-01-30)
Function
An output isolation transformer
box provides an entire isolation
solution for customer loads,
which is different from the
output transformer of
transformer-based UPSs. The
output transformer box
provides isolation functions
even in bypass mode. The
isolation transformer is a 2:1:1
industrial-frequency
transformer. It converts one
220 V output voltage into two
isolated 110 V outputs.
It measures the UPS ambient
temperature (–20°C to +80°C)
and humidity (0%–100% RH).
Monitors the UPS, provides the
Ethernet networking solution,
and enables ambient
temperature and humidity
detection. The SNMP card can
be used to connect to the NMS.
Provides six dry contact outputs
(normal mode, battery mode,
bypass mode, low battery
voltage, bypass backfeed, and
UPS faults), as well as two dry
contact control inputs (one is
the shutdown signal input, and
the other is reserved).
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Product Description
Remarks
Single phase, 10 kVA.
Used by the 10 kVA
UPS.
● Used together with
an SNMP card.
● For details, see
Temperature and
Humidity Sensor
Quick Guide
(02312PBL) .
● The BOM number
of the SNMP card
is 02354GJL.
● For details, see
EN83CTLA SNMP
Card User Manual .
● The BOM number
of the dry contact
card is 02354GJK.
● For details, see
EN83CTLC Dry
Contact Card User
Manual .
35
Advertisement
Table of Contents
