Battery Safety - Huawei LUNA2000-5KW-NHC0 User Manual

LUNA2000-(5-30)-NHS0
User Manual
Cabling Requirements
●
●
●
●
●
ESD
The static electricity generated by human bodies may damage the electrostatic-
sensitive components on boards, for example, the large-scale integrated (LSI)
circuits.
●

1.4 Battery Safety

Declaration
The Company shall not be liable for equipment functional abnormality,
component damage, personal safety accident, property loss, or other damage
caused by the following reasons:
●
●
●
●
●
Issue 06 (2022-03-01)
When routing cables, ensure that a distance of at least 30 mm exists between
the cables and heat-generating components or areas. This prevents damage
to the insulation layer of the cables.
Bind cables of the same type together. When routing cables of different types,
ensure that they are at least 30 mm away from each other.
Ensure that the cables used in a grid-tied PV power system are properly
connected and insulated and meet specifications.
The positions where cables are routed through pipes or holes must be
protected to prevent the cables from being damaged by sharp edges or burrs.
When the temperature is low, violent impact or vibration may damage the
plastic cable sheathing. To ensure safety, comply with the following
requirements:
– Cables can be laid or installed only when the temperature is higher than
0°C. Handle cables with caution, especially at a low temperature.
– Cables stored at subzero temperatures must be stored at room
temperature for at least 24 hours before they are laid out.
NO TICE
Wear ESD gloves when handling the equipment. Do not wear clothes prone to
static electricity.
The batteries are not charged as required during storage, resulting in capacity
loss or irreversible damage to the batteries.
A battery is damaged, falls, or leaks due to improper operations or incorrect
connection.
After being installed and connected to the system, the batteries are not
powered on in time, which causes damage to the batteries due to
overdischarge.
Battery running parameters are incorrectly set.
The customer or a third party uses the batteries beyond the scenarios
specified by the Company. For example, connect extra loads, or use with other
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
5