UPS2000-A-(6 kVA-10 kVA)
User Manual (App)
Step 6 Enter the user name and password and tap Log In. (The preset user name is
admin and the preset password is Changeme.)
Figure 5-10 Login screen
Step 7 Tap OK as prompted. The Change Password screen is displayed. After the preset
password is changed successfully, use the new password to log in to the app.
Figure 5-11 Changing password prompt
● After the initial login, change the password in time to improve account security
● Hold down the RESET button on the UPS rear panel for about 10s to restore
----End
5.3.3 Quick Settings
Step 1 After successful login, the Quick Settings screen is displayed. Verify parameters
such as Voltage level(V), Frequency level(Hz), and Battery parameter settings
Issue 02 (2024-01-30)
CA UTION
and prevent data tampering.
the preset WiFi password, preset user password, and SNMP card (if any) IP
address. Other parameters will not be restored.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
71