Table of Contents
Advertisement
UPS2000-A-(6 kVA-10 kVA)
User Manual (App)
Use diagonal pliers to cut off the port baffle plates based on the actual situation.
Figure 4-9 Port baffle plates
(1) Port baffle plates
Procedure
Step 1 Switch off the upstream AC circuit breaker for the UPS.
Step 2 Remove the covers from the UPS wiring ports.
Step 3 Install AC output power cables and then AC input power cables in sequence.
Figure 4-10 Installing AC power cables (6 kVA single-phase input single-phase
output)
Issue 02 (2024-01-30)
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
61
Advertisement
Table of Contents
