Load Sub-System - Chroma 63200 Series Operation & Programming Manual

High Power DC Electronic Load 63200 Series Operation & Programming Manual

7.2.5 LOAD Sub-system

LOAD
[:STATe]
:SHORt
[:STATe]
:KEY
:PROTection
:CLEar
:SAVE
LOAD[:STATe]
Description The LOAD command makes the electronic load active on or off.
Syntax
Parameter
Example
Query Syntax
Return Parameter
Query Example
Return Example
LOAD:SHORt[:STATe]
Description
Syntax
Example
Parameter
Query Syntax
Return Parameter
Query Example
Return Example
LOAD:SHORt:KEY
Description
Syntax
Parameter
Example
Query Syntax
Return Parameter
Query Example
Return Example
7-16
LOAD:[STATe] <NR1 | CHAR >
0 | OFF, 1 | ON
LOAD ON
LOAD OFF
LOAD:[STATe]?
0 | 1
LOAD?
1 (ON)
Activate or inactivate short-circuited simulation.
LOAD:SHORt[:STATe] <NR1 | CHAR >
LOAD:SHOR 1
LOAD:SHOR OFF
0 | OFF, 1 | ON
LOAD:SHORt:[STATe]?
0 | 1
LOAD:SHOR?
1 (ON)
Set the short key mode in the electronic load.
LOAD:SHORt:KEY <NR1 | CHAR >
0 | HOLD, 1 | TOGGLE
LOAD:SHOR:KEY TOGGLE
LOAD:SHOR:KEY 0
LOAD:SHORt:KEY?
0 | 1
LOAD:SHOR:KEY?
1 (TOGGLE)
Activate the electronic load.
Inactivate the electronic load.
Return if the electronic load is active.
Enable short-circuited simulation.
Disable short-circuited simulation.
Return the short-circuit simulation state.
Set short key mode to Toggle.
Set short key mode to Hold.
Return the short key mode in the
electronic load.