Chroma 63200 Series Operation & Programming Manual page 28

High Power DC Electronic Load 63200 Series Operation & Programming Manual
Short circuit
Current
Dimension (H × W × D)
Weight
Max. Power
Consumption
Operating Range 90 - 127Vac & 200 - 250Vac
Input Current
EMC & Safety
*Specifications are subject to change without notice.
1. The power rating specifications at ambient temperature = 25°C and see the diagram below for power derating.
Power Rating
100%
77%
10°C 20°C 30°C 40°C
2. For Vin greater than min. operating voltage and less than 10V.
3. For Vin greater than 10V.
4. Setting error will be 1% for R < 0.005Ω at CRL range.
5. Power F.S. = Vrange F.S. × Irange F.S.
6. If the operating voltage exceeds the rated voltage for 1.1 times, it would cause permanent damage to the device.
7. S (Siemens) is the SI unit of conductance, equal to one reciprocal ohm(Ω).
8. To ensure full load current at CCH and CCL mode under low operating voltage, please set the voltage measurement range
as low range.
9. The minimum rise time of CC dynamic is 150µs for 600V 63210. If the minimum rise time is shorter than 150µs, the current
overshoot will be over 5% of full scale current.
10. The specification is valid only for loading current >10A.
1-10
15A 150A
762.8 × 546 × 700mm /
30.03×21.49×27.55inch
(cabinet)
170 kg / 374.78 lbs
250VA
2.5A
CE
°C
Ambient Temperature
General
30A 150A
762.8×546×700mm /
30×21.5×27.6inch (cabinet)
170 kg / 374.45 lbs
400VA
100 -240 Vac
47 - 63 Hz
5A
CE
30A 150A
762.8×546×700mm /
30×21.5×27.6inch (cabinet)
170 kg / 374.45 lbs
400VA
100 -240 Vac
47 - 63 Hz
5A
CE