Chroma 63200 Series Operation & Programming Manual page 26

High Power DC Electronic Load 63200 Series Operation & Programming Manual
Short circuit
Current
Dimension (H × W × D)
Weight
Max. Power Consumption
EMC & Safety
*Specifications are subject to change without notice.
1. The power rating specifications at ambient temperature = 25°C and see the diagram below for power derating.
Power Rating
100%
77%
10°C 20°C 30°C 40°C
2. The Vin must be greater than min. operating voltage of each model.
All CR mode accuracy should refer to the CC mode accuracy
when calculating CR mode spec.
3. The Vin must be greater than 7V for each model.
All CR mode accuracy should refer to the CC mode accuracy
when calculating CR mode spec.
4. Setting error will be 1% for R < 0.005Ω CRL range.
5. Power F.S. = Vrange F.S. × Irang F.S.
6. S (siemens) is the SI unit of conductance, equal to one reciprocal ohm(Ω).
7. If the operating voltage exceeds the rated voltage for 1.1 times, it would cause permanent damage to the device.
8. To ensure full load current at CCH and CCL mode under low operating voltage, please set the voltage measurement range as low range.
1-8
30A 300A
443.7 × 440 × 589.4 mm /
17.46 × 17.32 × 23.2 inch
90 kg / 198.41 lbs
250VA
CE
°C
Ambient Temperature
General
60A 600A
762.8 × 546 × 700 mm /
30.03 × 21.49 × 27.55 inch
170 kg / 374.78 lbs
250VA
CE
,
thus it is necessary to add CC mode error amount
,
thus it is necessary to add CC mode error amount
100A 1000A
762.8 × 546 × 700 mm /
30.03 × 21.49 × 27.55 inch(cabinet)
170 kg / 374.78 lbs
250VA
CE