Chroma 63200 Series Operation & Programming Manual page 109

CURRent:STATic:RISE/FALL
Description
Syntax
Parameter
Example
Query Syntax
Return Parameter
Query Example
Return Example
CURRent:DYNamic:L1/L2
Description
Syntax
Parameter
Example
Query Syntax
Return Parameter
Query Example
Return Example
CURRent:DYNamic:RISE/FALL
Description
Syntax
Parameter
Example CURR:DYN:RISE 2.5
Query Syntax
Return Parameter
Set the current slew rate for constant current static mode.
CURRent:STATic:RISE <NRf+>[suffix]
CURRent:STATic:FALL <NRf+>[suffix]
For valid value range refer to respective specification.
CURR:STAT:RISE 2.5
CURR:STAT:FALL 1A/µs
CURRent:STATic:RISE?
CURRent:STATic:FALL?
CURRent:STATic:RISE? MAX
CURRent:STATic:FALL? MIN
<NR2> [Unit=A/µS]
CURR:STAT:RISE?
2.5
Set Dynamic Load Current during constant current mode.
CURRent:DYNamic:L1 <NRf+>[suffix]
CURRent:DYNamic:L2 <NRf+>[suffix]
For valid value range refer to respective specification.
CURR:DYN:L1 20
CURR:DYN:L2 10
CURR:DYN:L1 MAX
CURR:DYN:L2 MIN
CURRent:DYNamic:L1?
CURRent:DYNamic:L2?
CURRent:DYNamic:L1? MAX
CURRent:DYNamic:L2? MIN
<NR2> [Unit=Ampere]
CURR:DYN:L1?
35.6
Set current slew rate of constant current dynamic mode.
CURRent:DYNamic:RISE <NRf+>[suffix]
CURRent:DYNamic:FALL <NRf+>[suffix]
For valid value range refer to respective specification.
CURR:DYN:FALL 1A/µs
CURR:DYN:RISE MAX
CURR:DYN:FALL MIN
CURRent:DYNamic:RISE?
CURRent:DYNamic:FALL?
CURRent:DYNamic:RISE? MAX
CURRent:DYNamic:FALL? MIN
<NR2> [Unit=A/µs]
Set rise slew rate to 2.5A/µs for static
load.
Set fall slew rate to 1A/µs for static
load.
Return the rise slew rate of static load.
Set dynamic load parameter L1 = 20A.
Set dynamic load parameter L2 = 10A.
Set dynamic load parameter L1 = max.
value
Set dynamic load parameter L2 = min.
value.
Return the setting current in dynamic load
L1.
Set rise slew rate to 2.5A/µs.
Set fall slew rate to 1A/µs.
Set rise slew rate to the maximum value
of dynamic load.
Set fall slew rate to the minimum value
of dynamic load.
Language Dictionary
7-13