Cleaning The Robot's Floor Tracking Sensor; Cleaning The Robot's Rolling Brush - Tesla AI100 User Manual

4.5 Cleaning the Robot's Floor Tracking Sensor

Use a clean, dry microfibre or soft cotton cloth to wipe any debris that has ac-
cumulated in the round sensor opening on the right side of the bottom surface.
Don't put the cleaning cloth directly into the sensor entrance

4.6 Cleaning the Robot's Rolling Brush

1. Pull on the release tabs to unlock the brush guard as shown.
2. Lift the rolling brush to remove.
3. Clean the rolling brush with the provided cleaning
tool or a vacuum cleaner
4. Reinstall the rolling brush by inserting the fixed pro-
truding end first and then clicking into place.
5. Press down to snap the brush guard into place.
17
EN