Assembling The Appliance; Using The Appliance; Cleaning And Maintenance - Tesla AeroStar T300 Manual

ASSEMBLING THE APPLIANCE

1. Insert the tube into the body of the appliance until you hear a click and then place the cleaning
head on the tube and start cleaning.
2. To remove the tube, press the release button and pull it out of the body of the appliance.
1. Fit the dust bin.
2. Attach the adapter to the vacuum cleaner.
3. Fit the upholstery brush or crevice nozzle and start cleaning.

USING THE APPLIANCE

The appliance can be lifted and transported using the handle. Never pull or lift the appliance by the
power cord. To switch the device on, press the On/Off button. When you have finished cleaning, always
switch off the appliance, disconnect the power cord from the power supply and clean the appliance.

CLEANING AND MAINTENANCE

Before cleaning, disconnect the mains plug from the mains socket. Clean the vacuum cleaner with a
damp cloth and then make sure it is dry. Do not use solvents or abrasive cleaning agents.
The maximum suction effect will always be achieved with clean filters (HEPA + foam filter) and an
empty dust bin. We recommend cleaning the filters every time you empty the dust bin. When
vacuuming very fine dust, the pores of the filters may become clogged. This may reduce air