Optional Modules - Simplex 4010ES IDNAC Installation Manual

4.1.1

Optional modules

In addition to the basic modules, optional modules can be installed inside the one-bay 4010ES panels. The types of modules available
depend on the panel configuration as well as the accessibility and availability of the power distribution interface (PDI) blocks.
Note: Out of four PDI blocks in the top-bay PDI card, three are available since the ESS card utilizes one (Figure 11). A block has been made
available on the ESS card for the placement of a Dual Class A Isolator (DCAI).
Table 18 lists the optional modules that can be installed inside the different configurations of the 4010ES panels. Refer to the user manual
associated with each card for specifications and installation instructions. The list of these manuals is available in Table 23.
Optional modules
4010-9818
4010-9819
4010-6301
4010-6302
4010-6303
4010-6304
4010-9901
4010-9902 and 4010-9922
4010-9903 and 4010-9924
(Note 2)
4010-9904 and 4010-9925
(Note 2)
page 24
Figure 16: One-bay 4010ES panel (shown with optional LED module)
Table 18: Optional modules
Description
Network Media Card Wired (Mounts on 4010-9902 and 4010-9922)
Network Media Card Dual Fiber Optic (Mounts on 4010-9902 and 4010-9922)
4120 SM-L Duplex Fiber Media (Mounts on 4010-9902 and 4010-9922)
4120 SM-R Duplex Fiber Media (Mounts on 4010-9902 and 4010-9922)
4120 MM-L Duplex Fiber Media (Mounts on 4010-9902 and 4010-9922)
4120 MM-R Duplex Fiber Media (Mounts on 4010-9902 and 4010-9922)
VESDA Interface Card
4120 Network Interface Card
4120 Network Interface w/ Modem physical Bridge Class B
4120 Network Interface w/ Modem physical Bridge Class X
4010ES IDNAC Fire Alarm System Installation Guide
Blocks
none
none
none
none
none
none
1
2
2
2
579-1150 Rev M