48-Led Module - Simplex 4010ES IDNAC Installation Manual

4010ES IDNAC Fire Alarm System Installation Guide
3.4

48-LED Module

The 48-LED Module (Figure 13) comes pre-installed inside some base configurations of the 4010ES panel. Each LED can be associated with
a point, or group of points. By default, the module is supplied with red LEDs, except for the last column which has yellow LEDs. All of them
can be replaced by different color LEDs. Refer to Available panels and devices for a list of LED kits. Refer to Installing 4010ES systems for
instructions on replacing LEDs.
Figure 13: 48-LED Module (front view)
Figure 13 outlines what the different LEDs, jumpers and switches represent.
Figure 14: 48-LED Module LEDs, jumpers and switches (rear view)
page 21 579-1150 Rev M