Main Menu Choices (Setting Up Programs); Delete Program; Run Program - Baileigh Industrial MB-350 Operator's Manual

Main Menu Choices (Setting up Programs)

1. From the MAIN SCREEN, choose "RUN, VIEW OR EDIT A PROGRAM" Select this Feature
if you want to do any of those functions.
2. Up to 140 programs with 10 bends per program can be created using any alphanumeric
characters.
3. To edit a program, choose the program you wish to edit my entering a number or by using
the up down arrow keys (Figure 27).
4. After selecting the program touch the VIEW/EDIT button and the program parameters will be
displayed (Figure 33).
5. Make changes as necessary, press the <F1> key to save any changes.

Delete Program

1. Follow the above steps to get to the edit screen (Figure 27) and press and hold the CLEAR
PROGRAM button to erase all of the bend data for the selected program.

Run Program

2. Select this feature if you want to run an existing program.
3. To edit a program, choose the program you wish to edit by entering a number or by using the
up down arrow keys (Figure 33). After selecting the program touch the
4. RUN button and the program parameters will be displayed (Figure 27)
5. At this point, pressing the forward foot pedal will start the bending process; the machine will
rotate in the selected direction at the chosen speed to the desired degree totaling the bend
angle plus the spring back degrees.
NOTE: THE MACHINE WILL NOT BEND FORWARD UNLESS THE CLAMP DIE,
MANDREL AND PRESSURE DIE ARE OPENED OR HOMED (A GREEN LIGHT CONDITION)
6. When at the final position, the control will prompt you to PRESS REV PEDAL TO HOME
(Figure 29)
NOTE: THE MACHINE WILL NOT REVERSE UNLESS THE CLAMP DIE,
MANDREL AND PRESSURE DIE ARE OPENED OR HOMED (A RED LIGHT CONDITION)
18
18