Nexcom XPPC 24-200A User Manual page 53

Chapter 4: BIOS Setup
SATA Configuration
This section is used to configure .
Aptio Setup - AMI
Advanced
SATA Configuration
SATA Controller(s)
SATA Mode Selection
SATA Test Mode
Serial ATA Port 1
SATA Controller(s)
Enabled
Disabled
Version 2.21.1278. Copyright (C) 2021 AMI
SATA Controller(s)
Enables or disables the SATA controller.
SATA Mode Selection
Configures the SATA as AHCI mode.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
Enable or Disable SATA Device.
[Enabled]
[AHCI]
[Disabled]
Empty
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Test Mode
Enables or disables SATA test mode.
38
XPPC 24-200A User Manual