Nexcom XPPC 24-200A User Manual page 51

Chapter 4: BIOS Setup
CPU Configuration
This section is used to view CPU status and configure CPU parameters.
Aptio Setup - AMI
Main
Main Chipset PCIPnP
CPU Configuration
11th Gen Intel(R) Core(TM) i3-1115G4E @ 3.00 GHz
CPU ID 0x806C1
Microcode Revision 86
Stepping B0
Speed 2200 MHz
L1 Data Cache 48 KB x 2
L1 Instruction Cache 32 KB x 2
L2 Cache 1280 KB x 2
L3 Cache
Intel (VMX) Virtualization Technology
L4 Cache
Disabled
VMX
Enabled
SMX/TXT
Intel (VMX) Virtualization [Enabled]
Technology
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
C States [Disabled]
RaceConditionResponse Policy [Disabled]
Version 2.21.1278. Copyright (C) 2021 AMI
Intel Virtualization Technology
®
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Intel ® SpeedStep TM
Enables or disables Intel SpeedStep.
Turbo Mode
Enables or disables turbo mode.
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
Security Exit
When enabled, a VMM
can utilize the additional
hardware capabilities provided
by Vanderpool Technology.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
C States
Enables or disables CPU power management. Allows CPU to go to C states
when it's not 100% utilized.
RaceConditionResponse Policy
Enables or disables race condition response discovered.
36
XPPC 24-200A User Manual