Related Manuals for Nexcom XPPC 10-200
Summary of Contents for Nexcom XPPC 10-200
- Page 1 NEXCOM International Co., Ltd. Intelligent Platform & Services Business Unit Wide Screen Touch Computer XPPC 10-200 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published November 2021...
-
Page 2: Table Of Contents
Disclaimer ....................iv Precautions ....................6 Acknowledgements ................iv Jumper Settings ..................7 Regulatory Compliance Statements ............iv Locations of the Jumpers and Connectors for XPPC 10-200 ....8 Declaration of Conformity ..............iv Top View .....................8 RoHS Compliance ................... v Jumpers ....................9 Warranty and RMA ................ - Page 3 System Dimensions with Open Frame Kit ..........27 Panel Mounting ..................28 Chapter 4: BIOS Setup About BIOS Setup .................30 When to Configure the BIOS ..............30 Default Configuration ................31 Entering Setup ..................31 Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
-
Page 4: Preface
No describes how to keep the system CE compliant. part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from NEXCOM Declaration of Conformity International Co., Ltd. -
Page 5: Rohs Compliance
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products. -
Page 6: Warranty And Rma
“NEXCOM RMA Service Form” for the RMA number apply process. ▪ If RMA goods can not be repaired, NEXCOM will return it to the customer without any charge. ▪ Customers can send back the faulty products with or without accessories (manuals, cable, etc.) and any components from the card, such as CPU... - Page 7 ESD workstation. If no such station is available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
-
Page 8: Safety Information
There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. viii Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 9: Safety Precautions
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 10. All cautions and warnings on the equipment should be noted. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 10: Technical Support And Assistance
Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2. -
Page 11: Global Service Contact Information
16F, No.250, Sec. 2, Chongde Rd., Beijing, 100094, China Beitun Dist., Tel: +86-10-5704-2680 Taichung City 406, R.O.C. Fax: +86-10-5704-2681 Tel: +886-4-2249-1179 Email: sales@nexcom.cn Fax: +886-4-2249-1172 www.nexcom.cn Email: sales@nexcom.com.tw www.nexcom.com.tw Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... - Page 12 Tokyo, 108-0014, Japan No. 609, Yunlin East Rd., Tel: +81-3-5419-7830 Shanghai, 200062, China Fax: +81-3-5419-7832 Tel: +86-21-5278-5868 Email: sales@nexcom-jp.com Fax: +86-21-3251-6358 www.nexcom-jp.com Email: renwang@nexcom.com.tw www.nexcom.cn Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
-
Page 13: Package Contents
Preface Package Contents Before continuing, verify that the XPPC 10-200 package that you received is complete. Your package should have all the items listed in the following table. Item Part Number Name 10W30XPPC19X0 XPPC10-200-i3 ASSY 7400060049X00 Power Adapter FSP:FSP060-DHAN3(9NA0608046) Item Part Number... -
Page 14: Ordering Information
Preface Ordering Information The following below provides ordering information for XPPC 10-200. XPPC 10-200-i3 (P/N:10W30XPPC19X0) 10.1” WXGA LED P-CAP touch computer, Intel Tiger Lake ® Core i3-1115G4E XPPC 10-200-i5 (P/N:10W30XPPC20X0 ) 10.1” WXGA LED P-CAP touch computer, Intel Tiger Lake ®... -
Page 15: Chapter 1: Product Introduction
▪ Onboard M.2 2280 Key M with PCIe x4 signal for storage module ▪ Onboard M.2 2230 Key E for optional Wi-Fi modules ▪ Support power input 12 VDC Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 16: Hardware Specifications
– 2Grms @ sine, 5~500Hz, 1hr/axis Storage Device – 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (non-operating) ▪ 1 x M.2 M key 2280 (support PCIe x4) Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... - Page 17 ▪ Input: 100VAC to 240VAC ▪ Output: DC+12VDC Certification ▪ CE (EN55035 + EN55032) ▪ FCC Class A (EMI part 15B) ▪ LVD (EN62368-1) Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
-
Page 18: Knowing Your Xppc 10-200
Used to connect a headphone or a speaker. DB9 port used to connect RS232/422/485 compatible devices. Power DC Input HDMI LAN1 & LAN2 USB 3.0 Power Line-out Switch Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 19: Mechanical Dimensions
Chapter 1: Product Introduction Mechanical Dimensions Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 20: Chapter 2: Jumpers And Connectors
Static electricity can damage many of the electronic ▪ Use correct screws and do not over tighten screws. components. Humid environments tend to have less static electricity than Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 21: Jumper Settings
(on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 are Short Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 22: Locations Of The Jumpers And Connectors For Xppc 10-200
Chapter 2: Jumpers and Connectors Locations of the Jumpers and Connectors for XPPC 10-200 The figure below is the top and bottom view of the mainboard used in XPPC 10-200. It shows the locations of the jumpers and connectors. HDMI USB3_1... -
Page 23: Jumpers
Connector location: CLRCMOS Connector location: LCD_PWR Settings Settings 1-2 On 3.3V 1-2 On Normal 2-3 On 2-3 On Clear CMOS 1-2 On: default 1-2 On: default Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 24: Atx/At Mode Select
Chapter 2: Jumpers and Connectors ATX/AT Mode Select Connector type: 1x3 3-pin header, 2.0mm pitch Connector location: AT_ATX Settings 1-2 On 2-3 On 2-3 On: default Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 25: Connector Pin Definitions
MIC and Line Out Connector Speaker Connector Connector location: MIC_LOUT1 Connector location: SPK1 Definition Definition Definition Definition LOUT_R LOUT_JD OUT_L+ OUT_L- LOUT_L OUT_R+ OUT_R- MIC_R MIC_JD MIC_L Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 26: System Power Button
Connector type: 1x2 2-pin header Connector type: 1x4 4-pin header, 1.25mm pitch Connector location: J2 Connector location: FAN1 Settings Definition Definition +12V PWRBTN# FAN SPEED DETECT FAN SPEED CONTROL Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 27: Com Port Connector
DC Power Input Jack (+12V only) Connector type: 1x9 9-pin header, 1.0mm pitch Connector location: DCIN2 Connector location: COM1 & COM2 Definition Definition Definition Definition +12VSUS +12VSUS CGND Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 28: Sata Connector
Connector location: SATA Connector type: HDMI port Connector location: HDMI Definition Definition Definition Definition SATA_TXP TX2P SATA_TXN TX2N TX1P SATA_RXN SATA_RXP TX1N TX0P TX0N CLKP CLKN Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 29: Lan Connector
Definition Definition MDI_0P MDI_0N USB2_1N MDI_1P MDI_1N USB2_1P MDI_2P MDI_2N USB3_RX1N USB3_RX1P MDI_3P MDI_3N USB3_TX1N USB3_TX1P LINK1000# LINK100# USB2_2N USB2_2P ACTLED# +3VSB USB3_RX2N USB3_RX2P USB3_TX2N USB3_TX2P Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 30: Internal Connectors
HDD LED Connector Connector type: 1x2 2-pin header, 2.0mm pitch Connector type: 1x2 2-pin header, 2.0mm pitch Connector location: JP3 Connector location: JP2 Settings Settings HDD_LED+ RESET# HDD_LED- Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 31: Power Led Connector
Connector type: 1x2 2-pin header, 2.0mm pitch Connector type: 1x5 5-pin header, 2.0mm pitch Connector location: JP1 Connector location: JP5 Settings Definition Definition PWR_LED- COM1_RI PWR_LED+ COM1_RI +12V Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 32: Battery Connector
Battery Connector 12V Header Connector type: 1x2 2-pin header, 1.25mm pitch Connector type: 1x2 2-pin header, 2.0mm pitch Connector location: J1 Connector location: JP4 Settings Settings Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 33: Usb 2.0
Connector type: Internal dual USB 2.0 ports Connector location: USB2_78P1 & USB2_910P1 Definition Definition Definition Definition USB2N USB2P USB1N 12C_CLK I2C_DATA USB1P GPIO_PIN5 GPIO_PIN6 GPIO_PIN7 GPIO_PIN8 GPIO_PIN9 GPIO_PIN10 Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 34: Sata Power Connector
Connector type: 1x10 10-pin header, 1.0mm pitch Connector type: 1x2 2-pin header, 2.5mm pitch Connector location: PWR1 Definition Definition Definition PLTRST# EPSI_CLK ESPI_CS# ESPI_IO3 ESPI_IO2 ESPI_IO2 ESPI_IO0 ESPI_RST# 3.3V Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 35: Edp Connector
EDP_BKLT_CTRL EDP_D2- +12V EDP_D2+ +12V +12V EDP_D1- EDP_D1+ +12V EDP_D0- EDP_D0+ +V_PANEL (3.3V or 5V) +V_PANEL (3.3V or 5V) +V_PANEL (3.3V or 5V) EDP_AUXP EDP_AUXN EDP_BKLT_EN Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 36: M.2 2280/2242 M-Key
PCIE1_RXN PCIE4_RXP M2M_LED# PCIE1_TXN PCIE4_RXN +3VSB PCIE1_TXP RESET# PCIE4_RXP +3VSB CLKREQ# +3VSB CLK_PCIEN WAKE# PCIE3_RXN +3VSB CLK_PCIEP PCIE3_RXP PCIE3_RXN PCIE3_RXP M2M_PEDET +3VSB +3VSB PCIE2_RXN +3VSB PCIE2_RXP Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 37: M.2 2230 E-Key
M.2 2230 E-key Connector location: M2E1 Definition Definition PCIE_TXN PCIE_RXP Definition Definition PCIE_RXN 3VSB USBP 3VSB CLK_PCIEP USBN CLK_PCIEN SUSCLK PLTRST# CLKREQ# BT_DISABLE# WAKE# WIFI_DISABLE# 3VSB 3VSB PCIE_TXP Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 38: Block Diagram
Super I/O +12V 2.54mm 1 X 2 Pin Header F81804 Internal Connector 2 Pin TERMINAL BLOCK (+12V) COM2 WatchDog F81439 HW Montior (RS232) Timer COM1 (RS232/422/485) Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 39: Chapter 3: System Setup
Prior to removing the top cover, make sure the unit’s power CAUTION! CAUTION! CAUTION! is off and disconnected from the power sources to prevent electric shock or system damage. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 40: Installing Vesa Mount Kit
Recommended screws for the VESA mount kit: 4 * M4x8 screws. 4 * Screws (I3x5ISO+NYLOK) Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 41: System Dimensions With Open Frame Kit
Chapter 3: System Setup System Dimensions with Open Frame Kit Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 42: Panel Mounting
CUT OUT SIZE T=9.5mm (MAX) 3. Slide the panel PC through the hole until it is properly fitted against the panel. 6 * Screws (F3x5 Nylok NI+Heat) Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... - Page 43 5. Tighten the clamp’s screw until it touches the panel. Panel Clamp Do not overtighten the screws to prevent damaging the CAUTION! CAUTION! CAUTION! Panel PC. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
-
Page 44: Chapter 4: Bios Setup
This chapter describes how to use the BIOS setup program for XPPC 10-200. The settings made in the setup program affect how the computer performs. The BIOS screens provided in this chapter are for reference only and may It is important, therefore, first to try to understand all the setup options, and change if the BIOS is updated in the future. -
Page 45: Default Configuration
Powering on the computer and immediately pressing <Del> allows you to enter Setup. Load optimized default values. Press the key to enter Setup: Saves and exits the Setup program. Press <Enter> to enter the highlighted sub-menu Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... - Page 46 When “” appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
-
Page 47: Bios Setup Utility
F3: Optimized Defaults IGFX GOP Version 17.0.1060 F4: Save & Exit ESC: Exit System Date [Tue 10/26/2021] System Time [09:59:12] Version 2.21.1278 Copyright (C) 2021 AMI Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 48: Advanced
Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.21.1278 Copyright (C) 2021 AMI Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... - Page 49 When this field is set to Enabled, the VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Intel ® SpeedStep Enables or disables Intel SpeedStep. Turbo Mode Enables or disables turbo mode. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
- Page 50 Security Device. TCG EFI protocol and INT1A interface will not be available. SHA-1 PCR Bank Enables or disables SHA-1 PCR Bank. SHA256 PCR Bank Enables or disables SHA256 PCR Bank Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
- Page 51 This option configures the Serial ATA drives to use AHCI (Advanced Host Controller Interface). AHCI allows the storage driver to enable the advanced Serial ATA features which will increase storage performance. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
- Page 52 Displays the IO address and IRQ of the serial COM port. Onboard Serial Port Mode Select this to change the serial port mode to RS232, RS422, RS485. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
- Page 53 Detects and displays the current system temperature. Fan1 Speed Detects and displays the current fan speed. Vcore Detects and displays the Vcore voltage Detects and displays 5V voltage Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
- Page 54 Version 2.21.1278. Copyright (C) 2021 AMI Version 2.21.1278. Copyright (C) 2021 AMI Output Select Network Stack Configures which display output to use upon boot. Enables or disables UEFI network stack. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
- Page 55 Configures the items used for self test. Controller Only Test and Controller and NameSpace Test options are available. Selecting Controller and NameSpace Test will take longer to complete. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...
-
Page 56: Security
F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.21.1278. Copyright (C) 2021 AMI Administrator Password Select this to reconfigure the administrator’s password. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 57: Boot
Adjust the boot sequence of the system. Boot Option #1 is the first boot physically present user without full authentication. device that the system will boot from, next will be #2 and so forth. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual... -
Page 58: Save & Exit
Restore Defaults To restore the BIOS to default settings, select this field then press <Enter>. A dialog box will appear. Confirm by selecting Yes. Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved. XPPC 10-200 User Manual...