Figure 4-1: Hardcover Removal (Left) - Aerotech ATX165SL Hardware Manual

Hardware Manual
IMPORTANT: During the lubrication procedure, inspect the bearings and ball screw for
any damage or signs of wear.
1. Drive the stage to the end of travel closest to the motor.
Remove the four flat head screws
l
Slide the exposed hardcover out from under the carriage.
l
Note that the 250 mm travel version of the ATX165SL/SLE has a two-piece hardcover on this side
l
of the stage.
Figure 4-1: Hardcover Removal (Left)
DANGER: Mechanical Hazards!
Use extreme caution when you operate the stage without the hardcover.
Rotating Machinery! The ball screw can present a rotating machinery hazard.
l
Pinch Point! The stage tabletop can present a pinch hazard.
l
2. Drive the stage to the other end of travel.
Remove the four flat head screws
l
Slide the exposed hardcover out from under the carriage.
l
www.aerotech.com
ATX165SL/SLE
49