Hardware Manual
4.3. Motor Mounting
DANGER: Electrical Shock Hazard!
Do not connect or disconnect electrical components, wires, and cables while this
l
product is connected to a power source.
Before you do maintenance to the equipment, disconnect the electrical power.
l
Uncouple or otherwise prevent motion of motor-coupled machinery when you do ser-
l
vice to the equipment.
Table 4-1:
Hardware Requirements
Motor Screw Size
M4
IMPORTANT: Use Loctite 242 or Loctite 248 on the motor and coupling adapter
hardware
be sure that the expiration date is legible and the product has not expired.
If your stage is used in a vacuum or cleanroom environment, contact Aerotech.
Figure 4-3:
Motor Mounting Overview
www.aerotech.com
Shaft Coupling Screw
Size
M2.5
(Figure
4-3). Loctite products are printed with an expiration date. Before use,
Coupling Screw Bit Size
2 mm Hex
ATX165SL/SLE
Coupling Screw Torque
(in·lbs)
7 in·lbs
51