Figure 4-4: Attach The Coupling Adapter To The Motor Shaft; Figure 4-5: Attach The Motor The Stage - Aerotech ATX165SL Hardware Manual

ATX165SL/SLE
How to Mount a Motor
1. Remove the hard cover from the stage.
2. Locate the Shaft Coupling access holes (refer to
3. Test fit the Motor and Shaft Coupling to the Stage to ensure that you have access to the Shaft
Coupling clamp screws.
4. Apply a small quantity of either Loctite 242 or Loctite 248 to motor and coupling hardware.
5. Attach the Shaft Coupling to the Motor shaft (refer to
correct hardware and torque requirements.
Figure 4-4: Attach the Coupling Adapter to the Motor Shaft
6. Attach the Motor to the Stage in the correct orientation
that the motor flange is fully seated and the hardware is tight. The motor housing prevents the
use of a torque wrench.
Figure 4-5: Attach the Motor the Stage
52
Figure 4-3).
Figure 4-4). Refer to
(Figure 4-5). Use a hex wrench to ensure
Hardware Manual
Table 4-1 for the
www.aerotech.com