Table of Contents
Advertisement
compared to the standard is
displayed when the sample is
measured; if it is switched off, no
display is shown.
If the test result display is switched
on, the message "unqualified" is
displayed during the sample
measurement if the test result
exceeds the tolerance range
defined by the standard sample; if
the sample error is within the
tolerance range of the standard
sample, the message "qualified" is
displayed.
10.17 Tolerance Setting
Select "Tolerance setting" in the
measurement setting to call up the
setting for the tolerance query. The
user can set the tolerance values in
the tolerance setting according to the
colour management requirements.
After selecting the number to be
changed, the numeric keypad will be
displayed. Press the
"
" to move the cursor to the
next digit. When the cursor is on the
last digit, press the "
" button to
save the setting and return to the
measurement setting. If you do not
want to set or change the tolerance,
press the "
" button to return to
the main menu. When the tolerance
setting is completed, the device
26 | en
JCS-BA-e-2410
Advertisement
Table of Contents
