Table of Contents
Advertisement
12
Interfaces
The device has a USB and Bluetooth® 5.0 interface.
12.1
USB-C
The device's USB-C interface is a general interface that can be used to connect and
communicate with the PC, with the device automatically assessing the connection; it
can also be used to connect printers.
The USB-C interface on the base is a charger that can be used to charge the device
(5V===2A).
Note: Two USB-C interfaces cannot be connected to the data cable for charging at the
same time!
12.2
Bluetooth®
Devices equipped with a Bluetooth module can communicate with the PC via
Bluetooth.
If the client programme is installed on the PC, enable the Bluetooth option in the device's
system settings and connect the computer to Bluetooth. After successful matching, the
software will be connected in Bluetooth connection mode, and the Bluetooth icon will
appear in the lower right corner of the software, indicating that the connection via Bluetooth
is successful. Then the comprehensive control of the terminal device can be carried out
through the software, and the corresponding samples can be tested and analysed.
The corresponding app can be downloaded from the SAUTER website. If the app is
installed on the mobile phone, switch on the "Bluetooth" option in the "System settings" of
the device and connect the app to the device. After successful synchronisation, the
Bluetooth connection is successful. The software takes over the overall control of the
end device, tests and analyses the corresponding samples.
JCS-BA-e-2410
en | 31
Advertisement
Table of Contents
