Table of Contents
Advertisement
10.2
PC communication
USB or Bluetooth:
If the client program is installed on the
PC, the connection between the
device and the PC via USB data cable
is automatically recognised. If the
connection is successful, the end
device can be fully controlled via the
software and the corresponding
samples can be tested and analysed.
If the APP is installed on the mobile
phone, switch on the "Bluetooth"
option in the "System settings" of the
device and connect the APP to the
device. After successful
synchronisation, the APP uses the
Bluetooth connection mode and the
Bluetooth connection is successful.
The software takes over the overall
control of the end device, tests and
analyses the corresponding samples.
10.3
Data Manage
Click on Data manage in the main
menu. Data management is mainly
used to check and operate the
measured data records.
10.4
Check Records
Click on Check Records in the data
management to enter the standard
record. Note: The device displays two
decimal places when the chromaticity
value of the standard record is
checked.
JCS-BA-e-2410
en | 19
Advertisement
Table of Contents
