The "Print setting" is switched off by
default in the "System settings" of the
main menu. If you need to print, you
can switch on the corresponding
printer.
Use USB printer:
The user can connect the microprinter
to the device via USB. Once the
microprinter has been connected to
the device via USB, it can perform the
measurement and printing process on
the measurement interface. The
device sends the current
measurement data to the printer and
the printer finishes the printing
process.
Use Bluetooth printer:
Similar to the USB printer, the user
can first connect the device to the
microprinter and print on the
measurement interface during the
measurement. The device sends the
data of the current measurement data
set to the printer and the printer
completes the printing process.
Steps for using a Bluetooth printer:
1. Start the Bluetooth printer
2. Go to the system setting
Print→ Bluetooth printer
setting.
3. Enter the MAC address on the
back of the Bluetooth printer in
BLE mac, with a fixed length of
12 characters (e.g.
"4CE173C3FOOE"), and the
MAC address will be saved
automatically.
4. Click on Connect printer
Once the Bluetooth printer is
connected, you can print during the
measurement.
28 | en
JCS-BA-e-2410