Table of Contents
Advertisement
10.9
System Set
Click System Set in the main menu.
These include the measurement
settings and the device settings.
10.10 Measure Set
Click "Measure Set" in the system
settings to open the measurement
settings interface. The settings include
automatic measurement storage,
aperture selection, Bluetooth, simple
mode, measurement mode, display
setting, tolerance setting, average
measurement, pressure setting and
other options. You can check and
select various setting options
10.11 Save action
If the automatic storage of measured
values is switched on, each test
sample is automatically stored in the
device; otherwise the data set is not
automatically saved after the test of
the sample is completed, but only
after manually clicking on the save
icon
10.12 Orifice plate
This device series is equipped with a Ø 8mm orifice plate and a Ø 4mm orifice
plate, and different Ø 1*3 orifice plate models are equipped with different orifice
plates. When the measured surface area of the sample is large and uniform, it
JCS-BA-e-2410
en | 23
Advertisement
Table of Contents
