Basic Information (General); General Information On Warning Notices; Intended Use - sauter JCS 100 Operating Instructions Manual

4

Basic information (general)

4.1

General information on warning notices

Warnings are used in these operating instructions to warn you of possible personal
injury or damage to property in certain situations.
Signal word
DANGER
WARNING
CAUTION
NOTE
Symbols in warning notices:
Symbol
Warning signs
4.2

Intended use

Only use the precision measuring device to determine colour spectra and wavelengths.
In order to use the device as intended, drastic changes in the external environment of
the device should be avoided during the measurement, e.g. flickering of the ambient
light and rapid temperature fluctuations. During the measurement, the device should
8 | en
Description of the
Failure to observe the instructions will lead directly to
serious injury, permanent impairment (e.g. loss of a limb)
or death of the user or third parties
Failure to observe the instructions may result in serious
injury, permanent impairment (e.g. loss of a limb) or death
of the user or third parties
Failure to observe the instructions may result in minor
injuries or temporary damage to the user or third parties
(e.g. minor cuts)
Failure to observe the instructions may result in damage
to property
Meaning
Warning signs warn you of dangers that may lead to
personal injury. The symbol indicates the type of hazard.
Indicates general hazards or a danger point
Warning of electrical voltage
Warning of flammable substances
Warning of explosive substances
Warning of electrostatically sensitive assemblies
JCS-BA-e-2410