Daikin EBLA04E V Series Service Manual page 249

To remove the water pump motor
To install the water pump motor
EBLA04~08E + EDLA04~08E
Daikin Altherma 3 M
ESIE22-09 – 2022.05
Is the problem solved?
Yes
No
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
1 Disconnect the connectors from the water pump motor.
b
a Connector
b Bolt
c Water pump motor
d Pump housing
2 Remove the 4 bolts that fix the water pump motor to the pump housing.
3 Separate the water pump motor from the pump housing.
4 Remove the water pump motor.
5 To install the water pump motor, see
1 Install the motor on the water pump housing.
Action
No further actions required.
Return to "4.23.1 Checking
procedures" [
and continue with the next procedure.
"4.16 Plate
c d b
"4.23.2 Repair
draft – 31/05/2022 15:53
4 | Components
4
245] of the water pump
4
work" [ 202].
a
a
4
procedures" [ 248].
Service manual
249