Daikin EBLA04E V Series Service Manual page 103

To remove the 3-way valve body
EBLA04~08E + EDLA04~08E
Daikin Altherma 3 M
ESIE22-09 – 2022.05
a
b
a 3-way valve knob
b 3-way valve motor
6 Loosen the screw.
a
a Screw
7 Remove the 3‑way valve motor from the 3‑way valve body.
8 To install the 3‑way valve motor, see
Prerequisite: Remove
4
procedures" [ 102].
Prerequisite: Drain water from the piping to which the 3‑way valve body is
connected.
1 If applicable, remove the insulation that covers the 3‑way valve body.
2 Remove the 3‑way valve body from the water piping.
3 To install the 3‑way valve body, see
"4.1.2 Repair
the 3‑way valve motor,
"4.1.2 Repair
draft – 31/05/2022 15:53
4 | Components
4
procedures" [ 102].
see "4.1.2 Repair
4
procedures" [ 102].
Service manual
103