Daikin EBLA04E V Series Service Manual page 107

EBLA04~08E + EDLA04~08E
Daikin Altherma 3 M
ESIE22-09 – 2022.05
E1+E3
3 When installing in accordance with configurations E3 or E4, open the valve
motor cover by loosening the screw and change the jumper so as to change
the rotation direction of the valve.
Position of the jumper in case of installation according to configurations E1 and E2.
Position of the jumper in case of installation according to configurations E3 and E4.
4 Install the 3‑way valve motor on the 3‑way valve body.
5 Tighten the screw to fix the 3‑way valve motor to the 3‑way valve body.
a
a Screw
6 Install the 3‑way valve knob on the 3‑way valve motor.
E2+E4
DIR
2P
Y
N
L
draft – 31/05/2022 15:53
4 | Components
Service manual
107