Daikin EBLA04E V Series Service Manual page 141

EBLA04~08E + EDLA04~08E
Daikin Altherma 3 M
ESIE22-09 – 2022.05
a Backup heater thermal protector sensor
b Backup heater
b c
c
a Screw
b Backup heater thermal protector bracket
c Screw
d Backup heater thermal protector
3 Connect the wires to the wire terminals at the back of the backup heater
thermal protector.
4 Install the backup heater thermal protector on the bracket. Install and tighten
the 2 screws.
5 Install the backup heater thermal protector bracket on the switch box. Install
and tighten the 2 screws.
Is the problem solved?
Yes
No
a b
a
a d
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
draft – 31/05/2022 15:53
4 | Components
Service manual
141