Interface Menu; Job Timeout; Ethernet - Konica Minolta magicolor 5430 DL Service Manual

Main Unit Field Service
7.6

INTERFACE MENU

7.6.1

JOB TIMEOUT

Function • Sets the time to activate JOB TIMEOUT.
Use • To specify the amount of time before a print job times out.
Setting 1. Select "JOB TIMEOUT" and press the MENU/SELECT key.
/procedure 2. Select "Desired JOB TIME OUT activation time" with the Up key /Down key
press the MENU/SELECT key.
• The default setting is "15 seconds."
"5 seconds" to "300 seconds"
7.6.2

ETHERNET

NOTE
• When the "ETHERNET" setting is changed, the printer restarts automatically.
A. TCP/IP /ENABLE
Function • Enables TCP/IP
Use • To specify that the printer is connected to a TCP/IP network.
Setting YES: Enable TCP/IP. Print can be made at TCP/IP environment.
/procedure NO: Disable TCP/IP. Print cannot be made at TCP/IP environment.
1. Select "ETHERNET" and press the MENU/SELECT key.
2. Select "TCP/IP" and press the MENU/SELECT key.
3. Select "ENABLE" and press the MENU/SELECT key.
4. Select "Desired setting" and press the MENU/SELECT key.
• The default setting is "YES."
NOTE
• The screen displays "IP ADDRESS," "SUBNET MASK," "DEFAULT GATEWAY,"
and "DHCP/BOOTP" only when "ENABLE/YES" is selected.
YES
3-59
Menu (magicolor 5450)
NO
and