2 - INSTALLATION OF UNIT
2.3.4 - Maximum water loop volume
The installer must add expansion tank, suitable for the volume of the installation.
The unit is not provided with an expansion vessel, the installer must add an expansion vessel suitable for the water loop volume (taking
into consideration the Ethylen glycol concentration if applicable).
2.3.5 - Hydraulic circuit
Legend:
B
Shut-off valves
C
Line filter for water
D
Pressure gauges
E
Filling valve
F
System drain valve
CAUTION: The use of the hydraulic module on open loop is prohibited.
Figure 7: Typical diagram of the hydraulic circuit
K
D
B
D
B
C
G
E
H
F
G
Air flushing valve
H
3-way valve
I
Sanitary water accumulation tank
J
Inside system
K
Expansion vessel
J
I
25