Accessories - Riello NXHP Series Installation, Operation And Maintenance Instructions

1 - INTRODUCTION

1.6 - Accessories

Accessories
Flexible hydraulic tubes
Anti-vibration mounts
Remote human interface
Additional outdoor ambient
temperature sensor
Drain panel heater
Master / Slave sensor
Domestic Hot Water 3 way
valve
Water filling kit
Installlation kit
Description
Tubes are used to decoupling hydraulic circuits and the
units
Cushion installed under the unit to avoid vibration
trasmission
Remotely installed user interface
Additional outdoor ambient temperature sensor
Electrical heater to prevent condensate freezing (base
panel and drain duct)
Unit equipped with supplementary water outlet
temperature sensor kit to be field-installed allowing
master/slave operation of two to four units connected in
parallel
Solenoid valve for domestic hot water production
System enabling to fill the hydraulic circuit including:
ball valve, check valve, pressure gauge
Package for basic installation including:
Anti-vibration mounts, flexible hydraulic tubes, valves,
filter, antifreeze valve, filling kit
Advantages
Reduces vibration transmission to hydraulic installation
Reduces vibration transmission
Remote heat pump control with room temperature
sensor used to offset the water control point.
Possibility to configure the unit on field.
Better reading of outdoor air temperature
Condensates proper evacuation for cold climate
Optimised operation of chillers connected in parallel
with operating time equalisation
Useful for domestic hot water production
hydraulic circuit easy filling
Ease installation providing common necessary
accessories
19