Technical Data - KPM PROCESS SENSORS METIS M311 Operating Manual

METIS M311 / M322 / H311 / H322 (12-pin device connector)
9

Technical Data

Device-specific M3
Model
Temperature ranges
Spectral range
Detector
Response time t
90
Exposure time
Uncertainty
(ε = 1, t
= 1s, T = 23°C)
90 A
Repeatability
(ε = 1, t = 1s, T = 23°C
90 A
Temperature coefficient
(deviations to 23°C)
Serial interface
Optics (optional)
Power consumption
Ambient temperature
Device-specific H3
Model
Temperature ranges
Spectral range
Detector
Response time t
90
Exposure time
Uncertainty
(ε = 1, t
= 1s, T = 23°C)
90 A
Repeatability
(ε = 1, t = 1s, T = 23°C
90 A
Serial interface
Optics (optional)
Power consumption
Ambient temperature
M311
600–1400°C
650–1500°C
750–1800°C
Channel 1: 0.93–1.1 µm /
channel 2: 0.75–0.93 µm
)
* Channel 1: 0.99 µm /
channel 2: 0.87 µm
2 x Silicon
< 1 ms (with dynamical adaptation at low signal levels), adjustable up to 10 s
< 0.5 ms
Full-scale temp. up to 2500°C:
Full-scale temp. above 2500°C: 0.5% of reading in °C
(The measurement uncertainty is reached after a warm-up phase of min. 20 minutes; device
must be connected to the power supply)
0.1% of reading in °C + 1 K
)
From 10 to 60°C:
From 0 to 10°C and 60 to 80°C:
RS232 (max. 115 kBd) or RS485 (max. 921 kBd), switchable.
Resolution 0.1°C or 0.1°F
Manual focusable or optional motorized focus or fixed focus optics
max. 6 VA (all outputs unconnected)
0–80°C / 32 to 176°F, fiber optic and optics on optics side: -20 to 250°C / -4 to 482°F
(To prevent its overheating, the laser targeting light is deactivated at a device temperature
from 60°C / 140°F, the camera module from 55°C / 131°F)
H311
600–1100°C
650–1300°C
750–1400°C
900–1800°C
Channel 1: 0.93–1.1 µm /
channel 2: 0.75–0.93 µm
)
* Channel 1: 0.99 µm /
channel 2: 0.87 µm
2 x Silicon
< 80 µs, adjustable up to 10 s
< 40 µs
0.5% of reading in °C
0.2% of reading in °C + 1 K
)
RS485 (max. 921 kBd). Resolution 0.1°C or 0.1°F
Manual focusable optics (built-in or as fiber optics version)
max. 12 VA (all outputs unconnected)
0 to 60°C / 32 to 149°F, fiber optic and optics on optics side: -20 to 250°C / -4 to 482°F
(To prevent its overheating, the laser targeting light is deactivated at a device temperature
from 60°C / 140°F)
900–2500°C
)
1000–3000°C *
)
1100–3300°C *
0.3% of reading in °C+ 2 K
0.04%/K
0.06%/K
1000–2000°C
1100–2200°C
1300–2500°C
)
1600–3300°C *
M322
300–1000°C 600–2300°C
350–1300°C 800–3000°C **
400–1600°C 1000–3300°C **
500–1800°C
Channel 1: 1.65–1.8 µm /
channel 2: 1.45–1.65 µm
** ) Channel 1: 1.64 µm /
channel 2: 1.4 µm
2 x InGaAs
H322
350–800°C 800–2000°C
400–1200°C 1000–2500°C
500–1300°C 1300–3000°C **
550–1400°C
Channel 1: 1.65–1.8 µm /
channel 2: 1.45–1.65 µm
** ) Channel 1: 1.64 µm /
channel 2: 1.4 µm
2 x InGaAs
)
)
)
67 / 81