Table Of Contents - KPM PROCESS SENSORS METIS M311 Operating Manual

Content
1 General ................................................................... 4
1.1 Information to this Manual ............................... 4
1.2 CE Conformity ................................................. 4
1.3 Limitation of Liability ........................................ 4
1.4 Terms of Warranty ........................................... 4
1.5 Devices with PID Controller ............................. 4
1.6 Copyright ......................................................... 5
1.7 Customer Service / Spare Parts ...................... 5
1.8 Disposal ........................................................... 5
2 Safety ...................................................................... 5
2.1 Use of the Manual ........................................... 5
2.2 Supplementary Information about the
Operation ......................................................... 5
2.3 Warning Notes ................................................. 5
2.4 Safety Labels / Symbols .................................. 6
2.5 Device Labels .................................................. 6
2.6 Identification Label........................................... 6
2.7 Laser Targeting Light ...................................... 6
2.8 Through-lens Sighting ..................................... 6
2.9 Electrical Connection ....................................... 7
2.10 Responsibility of the Operators / Process
Responsibility .................................................. 7
3 Overview ................................................................. 7
3.1 Intended Use ................................................... 7
3.2 Scope of Delivery ............................................ 7
3.3 Model Designs ................................................. 8
3.4 Device / Software Features ............................. 8
4 Electrical Connection ............................................ 9
4.1 Cable Colors and Pin Assignment (14 wire
connection cables)........................................... 9
4.1.1 Factory Settings ......................................... 10
4.1.2 Power Supply ............................................. 11
4.1.3 Analog Outputs ........................................... 11
4.1.4 Configurable Inputs / Outputs..................... 12
4.1.5 Serial Interface RS232 / RS485 (M3:
switchable RS232 / RS485; H3: only RS485)
.................................................................... 13
4.1.5.1 Interface Converter (Accessory) ........... 14
4.1.5.2 Maximum Transfer Speed ..................... 14
4.1.6 Shielding / Avoidance of Cable-Related
Interferences............................................... 15
4.1.7 Camera Module .......................................... 15
4.2 Devices with additional Profibus-DP or Profinet
Connection .................................................... 15
2 / 81
METIS M311 / M322 / H311 / H322 (12-pin device connector)
4.2.1 Pinout Profibus-DP ..................................... 16
4.2.1.1 Status LEDs Profibus-DP ...................... 16
4.2.2 Pinout Profinet ............................................ 16
4.2.2.1 Status LEDs Profinet ............................. 17
4.3 Devices with additional Ethernet Connection 17
4.3.1 Pinout Ethernet ........................................... 17
4.3.1.1 Status LEDs Ethernet ............................ 17
5 Mechanical Installation ....................................... 18
5.1 Mounting ........................................................ 18
5.2 Mounting Optical Fiber / Optics (only devices
with optical fiber) ............................................ 18
5.2.1 Bending Radius of Optical Fiber ................. 18
5.2.2 Winding and Unwinding the Optical Fiber .. 18
5.2.3 Mounting the Optical Fiber ......................... 18
5.2.4 Connect the Optics ..................................... 19
5.3 Ambient Temperature .................................... 20
5.4 Ratio Technology / Alignment onto the
Measuring Object .......................................... 20
5.4.1 Alignment with the Laser Targeting Light ... 21
5.4.2 Alignment with the Through-Lens View
Finder Sighting ........................................... 21
5.4.3 Alignment with the Camera Module ........... 22
5.5 Adjusting the Measuring / Focus Distance .... 22
5.5.1 Manually Focusable Optics ........................ 22
5.5.2 Motorized Focus Optics (only M3) .............. 22
5.5.3 Manually Focusable Fiber Optic Lenses .... 23
5.6 Spot Size Tables ........................................... 23
5.6.1 Manually Adjusted or Motorized Focus
Optics.......................................................... 24
5.6.2 Focusable Fiber-Optic Lenses ................... 24
5.6.3 Calculation of the Spot Size Diameter
Outside the Focused Distance ................... 25
6 Configuring the Pyrometer ................................. 26
6.1 Key Functions ................................................ 26
6.2 Parameters / Settings .................................... 27
6.2.1 Response Time t
6.2.1.1 Dynamic Adaptation at Low Signal Levels
(only M3 devices) .................................. 28
6.2.2 Peak Picker Storage Mode / Clear Time .... 28
6.2.3 Emissivity Slope ......................................... 28
6.2.4 Switch-off Level / Signal Strength / Dirty
Window Monitoring ..................................... 29
6.2.4.1 Switch-off Verification (only via
SensorTools software) .......................... 29
6.2.5 Emissivity Ɛ (when used in 1-color mode) .. 29
6.2.6 Window Transmittance ............................... 30
...................................... 27
90