Output | Input | Overview - RGBlink X3 User Manual

3.2.3 Output | Input | Overview

Click to check rear panel interface as
shown in the right figure.
Note:
1. purple tip indicates input,
2. Interface Color Description: 1) Green: normal signal; 2) Yellow: abnormal signal; 3) White: no signal.
( Due to hardware limitation, interface of SDI output module always displays white whether there is or isn't a signal.)
Device Connection
1. Click the device needed in the <All Devices> list.
2. Click device name in the <Chosen Devices>.
icon indicates successful connection.
Output Setting
Click any output port, the board where the port
locates is selected. Users can do settings to the port
now.
A red rectangle flashes around the chosen port
when it is chosen.
Resolution
X3 supports resolution settings of output modules.
Switch Mode: Manual/Auto
Output Switch: ON/OFF
Format Range: ALL/Board
All Format Range: To set output resolution of all
output modules to be the same. Resolutions can be
chosen as shown in the right figure.
Board Format Range: To set the resolution of all output
ports of the selected module to be the same. The
resolution of other modules can be set to different
resolutions.
X3
blue tip indicates output,
User Manual
yellow tip indicates communication.
22