Connect X3 And Computer - RGBlink X3 User Manual

The system begins to work,and the OLED module shows the input slot and output slot
information, device status, COM. Versions. IP address and serial number.

2.4 Connect X3 and Computer

Use network cable to connect the X3 and computer as the following picture show:
Set the IP address of the computer and make sure the computer and the device are in same
network range. IP address of the device is available on the OLED screen after it is powered on. For
example if the IP of the device is 192.168.110.1, just make sure the IP of the computer is in
192.168.xxx.x, but not exact the same as the device.
13
X3 User Manual