RGBlink X3 User Manual page 20

Please note the keyboard area where allows to set
short cut keys.
If the setting goes wrong or no need for short cut keys
to clear some keys or clear all.
any more, click
Clear: To clear some keys, the keys need to selected
before hand.
Clear all: To remove all already set short cut keys.
Users can also Save The Keyboard Setting As Script.
Scrip Set
File Path: Save the current Keyboard Settings in
the script to the local path
File Name: Script file name
Load Script: Load/Delete
Click Return to back to <System Setting>
Communication Setting：The default is <search>, if
it is <direct>, users need to type the corresponding
IP address.
Serial Port：Search only those connect via serial port.
Ethernet Connection：Search only those connect via
Ethernet.
Both Are Chosen: Click both, both connections
change synchronously.
Display Setting: Turn on Expanding Mode if there is
an extension screen.
Novice Guide: Check novice guide for quicker
operation of XPOSE 2.0 software.
Auto Connect: Turn on auto connection switch and
the interface will pop up a prompt to remind the user
whether to restore the previous interface.
X3 User Manual
19