RGBlink X3 User Manual page 30

USB
Input Port：Chosen USB port
USB Video Player Setting: Can select play in
order, random, single cycle and all cycle, switch to
pre or next, pause or play, and read the video
progress bar and time.
USB Image Play Time: Click the image, it will
display the setting interface, default time is 0s. Set
the switch time, and click "Set"
Play Image Player Setting: Can select play in
order, random, single cycle and all cycle, and
switch to pre or next, pause or play
Overview
Click Return
Control, Factory Setting.
Device Info: users can check communication
module version, current device temperature and
MAC information.
Input Module Info: Users can check current input
module name and MCU version.
"...." indicates that there are no input modules, as
shown in the right figure.
Output Module Info: Users can check current
output module name and MCU version.
"...." indicates that there are no output modules,
as shown in the right figure.
IP
Support auto/manual setting. Show IP Address,
Netmask, Gateway
X3
, there are Overview, IP, Fan
User Manual
29